基于EKF的水下LD通信精对准控制算法

高速激光通信中接收机与光斑中心很难处于精对准状态,导致水下光通信链路难以稳定建立.首先采用蒙特卡洛仿真统计法分析激光光子在海水中传输的接收光强分布规律,再通过实验对接收端的光斑图像进行采样分析,利用曲线拟合得到接收器位置与接收光强的关系.仿真与实验结果表明:光束经过25 m的水下传输,接收光强分布仍近似为高斯分布.采用非线性估计算法(扩展卡尔曼滤波)与基本状态控制反馈理论,根据接收光强度估计接收器当前位置与最大光强处的距离,通过反馈算法实现接收端与光斑中心的主动跟踪对准.算法仿真结果显示,接收端对准误差在2 mm以下,稳定后接收效率超过98%.     

Bilayer Cylindrical Conduit Consisting of Electrospun Polycaprolactone Nanofibers and DSC Cross‐Linked Sodium Alginate Hydrogel to Bridge Peripheral Nerve Gaps

Herein, a bilayer cylindrical conduit (P‐CA) is presented consisting of electrospun polycaprolactone (PCL) nanofibers and sodium alginate hydrogel covalently cross‐linked with N,N′‐disuccinimidyl carbonate (DSC). The bilayer P‐CA conduit is developed by combining the electrospinning and outer–inner layer methods. Using DSC, as a covalent crosslinker, increases the degradation time of the sodium alginate hydrogel up to 2 months. The swelling ratio of the hydrogel is also 503% during the first 8 h. The DSC cross‐linked sodium alginate in the inner layer of the conduit promotes the adhesion and proliferation of nerve cells, while the electrospun PCL nanofibers in the outer layer provide maximum tensile strength of the conduit during surgery. P‐CA conduit promotes the migration of Schwann cells along the axon in a rat model based on functional and histological evidences. In conclusion, P‐CA conduit will be a promising construct for repairing sciatic nerves in a rat model.     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Synthesis of ionic liquid intercalated layered double hydroxides of magnesium and aluminum: A greener catalyst of Knoevenagel condensation

Due to their structural merits that arise from their stability and high surface area, the layered double hydroxide (LDH) materials have caused strong attention. These characteristics provided intriguing possibilities with improved efficiency for catalytic applications. In this work, the preparation of 1-butyl-3-methylimidazolium hydroxide ([BMIM]⁺OH⁻) intercalated by a facile approach in a layered double hydroxide (LDH) matrix is reported and its implementation as a greener catalyst is shown. Different physico-chemical techniques such as XRD, FTIR, TGA, and N₂-physisorption, HRTEM, and CO₂ adsorption are implemented to characterize the structure of the fabricated catalysts. The [BMIM]⁺OH⁻/LDH exhibit outstanding catalytic performance in Knoevenagel condensation, resulting from the high LDH surface area and synergistic effects between both the intercalated ionic liquid and LDHs matrix. Knoevenagel’s fabricated catalysts can be exploited to catalyze different condensations and can be reused well. This work therefore generates good opportunities in the field of catalysis for the preparing and implementation of LDH-based catalysts.     

Design of sextuple-mode triple-ring HTS UWB filter using two-round interpolation

A single-stage ring resonator capable of introducing six modes within the ultra-wideband (UWB) passband is presented. The sextuple-mode resonator consists of three rings and three sets of stepped-impedance open stubs. Based on this sextuple-mode resonator, a UWB filter fed by the interdigital-coupling line (ICL) is designed. And we propose a two-round interpolation method to obtain the filter's initial dimensions. The designed filter is fabricated on a double-sided YBCO/MgO/YBCO high-temperature superconducting (HTS) thin film for demonstration. The experimental results show that this UWB filter produces eight resonances in the passband eventually, which effectively improves the in-band reflection and the band-edge steepness. Moreover, the upper stopband performance is enhanced due to the transmission zeros (TZs) generated by the stepped-impedance open stubs and the ICL structure. The measured good performance verifies the practicability of the two-round interpolation approach, which can also be extended to other odd-even-mode filter designs.     

Was Pauling Mistaken about Metals?

Pauling described metallic bonds using resonance. The maximum probability domains in the Kronig–Penney model can show a picture of it. When the walls are opaque (and the band gap is large) the maximum probability domain for an electron pair essentially corresponds to the region between the walls: the electron pairs are localized within two consecutive walls. However, when the walls become transparent (and the band gaps closes), the maximum probability domain can be moved through the system without a significant loss in probability.     

Comparison of Bifurcated Halogen with Hydrogen Bonds

Bifurcated halogen bonds are constructed with FBr and FI as Lewis acids, paired with NH₃ and NCH bases. The first type considered places two bases together with a single acid, while the reverse case of two acids sharing a single base constitutes the second type. These bifurcated systems are compared with the analogous H-bonds wherein FH serves as the acid. In most cases, a bifurcated system is energetically inferior to a single linear bond. There is a larger energetic cost to forcing the single σ-hole of an acid to interact with a pair of bases, than the other way around where two acids engage with the lone pair of a single base. In comparison to FBr and FI, the H-bonding FH acid is better able to participate in a bifurcated sharing with two bases. This behavior is traced to the properties of the monomers, in particular the specific shape of the molecular electrostatic potential, the anisotropy of the orbitals of the acid and base that interact directly with one another, and the angular extent of the total electron density of the two molecules.